39 lines
1.0 KiB
Plaintext
39 lines
1.0 KiB
Plaintext
# General Usage
|
|
|
|
## Prerequisites
|
|
|
|
You must have avr-gcc and avrdude installed. To install it
|
|
on a debian-based system, please run the following command:
|
|
|
|
apt install avr-gcc avrdude
|
|
|
|
## Build and Flash
|
|
|
|
Run this next command in the project root directory to
|
|
build and flash the project using an usbasp programmer:
|
|
|
|
make all
|
|
|
|
See the Makefile for different settings for your specific
|
|
build environment. To remove all build related files you
|
|
may run this command:
|
|
|
|
make clean
|
|
|
|
## Setting Temperature and Dewpoint Targets
|
|
|
|
You can use the script below to send serial commands (you
|
|
may need to run 'git submodule update --init' if the tools
|
|
directory is empty):
|
|
|
|
./opt/tools/serial-send.py <command> <args ...>
|
|
|
|
Issue the SET command to update the target settings:
|
|
|
|
SET <temperature> <dewpoint>
|
|
|
|
Settings are stored in EEPROM and are persistent until a new
|
|
SET command is issued. Keywords are not case-sensitive. Both
|
|
arguments may contain a decimal point followed by a sequence
|
|
of digits.
|